LJ18A3-8-Z/EX Inductive Proximity Switch Sensor DC NO 2-Wire Normally Open 8mm Features: This is a normally open proximity switch sensor with detection distance of 8mm to 10mm. When proximity switch is close to some target object, it will send out control signal. Widely used in automatic control industry for detecting, controlling, and non-contact switching. High sensitivity, quick response, stable performance. Non-contact detection avoids the sensor and the target object from damages. Specification: Model: LJ18A3-8-Z/EX Detection distance: 8mm±10% Setting distance: 0-7mm Delay distance: <10% of detection distance Detection object: Magnetic metal(The detection distance decreases when it is non-magnetic metal) Standard detection object: Iron 30*30*1mm Response frequency: 0.5kHz Supply voltage: DC12-24V (6-36V) impulse (P-P) below 10% Withstand voltage: AC1000V 50/60Hz 1min Current consumption: N.P type: <13mA, D type: <0.8mA, A type: <1.7mA Control output: N.P type: <300mA, D type: <200mA, A type: <400mA Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption Ambient temperature and humidity: -30-65℃, 35-95%RH Temperature influence: Temperature range -30-65℃, at 23℃, ±15% detection distance; Temperature range -25-60℃, at 23℃, ±10% 0detection distance Insulation impedance: >50MΩ Housing material: brass nickel plating Detection surface: ABS   Package list: 1 * Inductive Proximity Switch Note: 1. Please allow slight error due to manual measurement. 2. Different monitor colors may be different. Thanks for your kind understanding.