Can directly drive 2 DC motors with a drive current of 2A The motor output uses 8 high-speed Schottky diodes as protection The stacked design can be directly plugged in, making it more convenient to use Made of high-quality materials Logic part input voltage VD: 5V Drive part input voltage VS: VIN input 6.5~12V, PWRIN input 4.8~35V Logic part working current ISS: Less than 36mA Drive part working current IO: Less than 2A Maximum power dissipation: 25W (T=75C) Control signal input level: high voltage contains translatable low level -0.3VLess than 1.5V Operating temperature: -25+130C Hardware interface: 5.0mm spacing terminal With fixed buckle, and can access control signal through array Drive form: dual-channel high-power H-bridge drive Pin occupation: D4~D7 directly drives the motor Support PWM/PLL mode motor speed control (Due to different batches, the printed words on the product be different, which does not affect use) Colour:Blue Material:PCB Package Contents: 1 x Drive Board Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.