설명
5"Color TFT LCD Car Rearview Monitor with 2 video input, works perfectly with car rearview cameras.
With 2 video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD.
When parking the car, the rearview image appears onto the screen automatically.
Designed ith menu buttons,the brightness/contrast/hue/language is adjustable.
Supports car DVD, VCD, camera, and other video equipment.
Easy installation without damaging any parts of the car: just clip on the original mirror.
Easy installation ,without damaging any parts of the car, clip on the original mirror
No Audio input or output.
Specifications:
Screen Size: 5inch TFT 16:9 screen
Display Component: Color TFT-LCD
Number of Dots: 800W * RGB * 480H
Video system: PAL/NTSC compatible
Power supply: DC 12V
Rated power consumption: 3W
Operation temperature: -30~+60
Storage temperature: -40~+60
Parking Sensors:
1. Rate Voltage: 12V
2. Operating Voltage Range: 9~16V
3. Rate Current: 20~200mA
4. Detecting distance: 0.3 - 2.5m
5. Ultrasonic Frequency: 40KHz
6. Working Temperature: -40~80C
7. Display Working Temperature: -40~60C
HD CCD
Car Rear view Reversing Backup Parking Camera
With 2 LED Lights
Images Sensors: For Sony HD CCD
TV System:NTSC(Default)/PAL
Effective Pixels:NTSC:656(H)592(V) PAL:628(H)*586(V)
Sensing Area(mm):4.9X3.7
Resolution(TV Lines):680 TV lines
Min IIIumination:0.01 Lux
Video Output:75 Ohm
S/N ratio:48dB
Lens F=1.7 mm waterproof lens
Lens Angle:170 degree
Operating Temperature:-30C~+75C(RH95% Max.)
Storage Temperature:-40C~+85C(RH95% Max.)
Wireless module for car reverse camera that enables normal reverse camera
This listing is for the wireless module only.only can use one camera
Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the wireless module (transmitter) to your camera via the two cables -one plug for AV output andone plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your car is in reverse shift.
-
브랜드:
Unbranded
-
카테고리:
부대용품
-
색상:
Option 5
-
Fruugo ID:
309546887-692887478
-
EAN:
8133773247562
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction.
GENERAL WARNINGS
INTENDED USE: Use this product only for its intended use as described in the user manual.
SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities.
INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.