JF-1040B 25N 24V DC Electromagnet Push Pull Type Sole Electromagnet 15mm Stroke SH

1、DC electromagnets are mainly used in vending machines. transportation equipment. office facilities. household appliances. machinery. etc. 2、Easy installation with female thread mounting holes. 3、Tinned copper wire. anti-oxidation. lower resistance. 4、Low friction ensures high efficiency and long service life. 5、Made of high quality electronic components. stable and reliable performance. Item Type: Push-Pull Type DC Electromagnet Suction: 25N Product Model: JF-1040B Stroke: Approx. 15mm / 0.6in Current: 400mA Product Weight: 137 g / 4.8 oz(approx.) Operating Conditions: 1. Operating Temperature: Between -5 ° C and 40 ° C solenoid valve will not solidify 2. Operating Humidity: Relative humidity between 45% and 85% solenoid valve will not solidify 3. Storage Temperature: Between -40 ° C and 75 ° C solenoid valve will not solidify 4. Storage Humidity: Relative humidity between 0% and 95% solenoid valve will not solidify Performance Requirements: Temperature Rise: 65 or less (level A) Life: 1million cycles or more under load Test Environment: 1. Ambient Temperature: 23±2°C 2. Relative Humidity: 50±10% 3. Atmospheric Pressure: 1013MPa 4. Insulation Resistance: When measuring with 500VDC insulation resistor. the insulation resistance between the coil and the yoke must be at least 100MΩ. 5. Insulation Strength: The insulation strength between the coil and the yoke should be at least 600VAC/1 minute. 1 x DC Electromagnet