About the product Our moldable tooth gel kit contains polyvinyl alcohol and polyvinyl alcohol cross-linked polymer. It can . Its usage is very simple: 1. Prepare the materials and put the powder and liquid in a 2:1 ratio on a glass plate or smooth paper (in actual operation, the powder ratio is slightly larger, and the bonding strength and hardness will be better) 2. Dental treatment is carried out, rinse, clean the tooth surface or tooth cavity (use a probe to remove internal residues), dry (dry with cotton balls) Note: After drying, the tooth cavity can no longer be contaminated by saliva, use cotton balls or paper towel rolls to isolate the tongue, cheek and teeth) 3. .Mix the material with the handle of the dental mirror (this is a plastic handle, remember not to use metal tools to adjust it, the metal will react with the material (use the material to change color) mix the powder and liquid thoroughly 4. Fill the mixed material with the handle of the dental mirror. After placing the material in the hole, trim it with a dental probe. Let it cure for about 1 minute. Use the probe to scrape off the excess material on the surface of the tooth, adjust the height immediately after adjustment, and remove the excess material with a wet cotton ball. After filling for 24 hours, the affected side can be forced to bite. And it can accurately fit the contour of the mouth and fit comfortably. Product Name: Shapeable Tooth Gel Kit Product Ingredients: Polyvinyl Alcohol, Polyvinyl Alcohol Cross-linked Polymer Keywords: Tooth Gel Weight: 24g Product Specifications: 1 set Product size: mixing paper: 8*6cm tooth filling liquid: 3.5*1.6cm tooth filling powder: 4*1.5cm spoon: 4.8*1.3cm mixing knife: 7.6*1cm Note: Light reflection and different monitors may cause the color of the product in the picture to be slightly different from the actual product. Minor errors are allowed in the measurement.