Feature:1. Timer Mode: Timer mode and manual mode are used concurrently. Timer mode is to manually set the time to open and close the chicken coop door according to the season, direction, and the regular in and out time of the captive chickens to achieve a convenient and efficient effect, and also protect your chickens and ducks and other poultry from other predators such as weasels at night.2. High Definition LED Display: The time is clearer and easier to set, and the specific opening and closing times of the coop door can be clearly seen through this display.3. Remote Control Distance Mode: Accessible control distance can reach 50 meters (Note: remote control distance is affected by weather and battery power).4. Light Sensing Door Opening Mode: The chicken coop door opens automatically at dawn with automatic sensing and closes automatically at dark. Suitable for all the right size chickens and ducks. As a chicken coop accessory for your chickens, ducks and other poultry's life!5. Protecting Poultry: This automatic chicken coop door controller is safer and sturdier enough to withstand predators and protect poultry.Specification:Item Type: Chicken coop door controllerMaterial: ABSWeight: Approx. 839g / 29.6ozProduct Size: Approx. 12.5x12.5x9cm / 4.9x4.9x3.5inControl Function: Light sensor, timing, remote controlWaterproof Rating: IP44Battery Pack (Excluded): 4 x AA batteries ( it is recommended to use rechargeable batteries so that can be repeated and protect environment)Note: Ordinary AA battery life of about 9 months (depending on what brand of batteries customers use to measure the use of time).Remote Control: 1 x 27A12V battery (excluded)Remote Control Installed 1 Time Battery Use Time: 1 yearWhether The Original Setting Time Is Automatically Saved After Power Failure: NoProduction Object: Chicken, duck, goose.Package List:1 x Controller1 x Hex Wrench1 x Screwdriver8 x Screws1 x Soft Ruler1 x Instruction Manual2 x Remote Control4 x Pulley4 x Screws1 x RopeNote:1. New batteries and old batteries should not be mixed. Always make sure the batteries are inserted with the correct polarity before inserting them. Batteries should be removed from the device and disposed of safely.2. If the device is left idle for a long time, the battery should be removed. Power terminals must not be short circuited.3. In remote control, the induction is affected if the obstacle object is too large.