AC 85V 110V 220V 250V Motor Remote Controller Wireless Remote Control Switch UP Down Stop Tubular Motor Controller Motor Forward Reverse TX RX 1.Input Voltage: AC85-250V 2.Output Voltage: 2pcs Live Line 3.Transmitter Latched Button " " Up/Motor Forward; Button " " Down/Motor Reverse; Button " " Stop; 4.Applicative Motor: AC220V 500W or less 3 Lines Forward Reverse Motor (Forward Line +Reverse Line+ COM Line) 5.Encoding Type: Learning Code (Learning Button to add Transmitter). 6.Receive Size: 98x 52 x 25mm (L x W x H) 7.Transmitter Size: 120 x 45 x 18mm (L x W x H) 8.Transmitter: 50m Transmitter with a base for fixed it on the wall. 9.Frequency:315 / 433 MHZ Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency 10.Learning Code Controller button function: Up button: scroll up; stop button: stop, release after power off; down button: scroll down 2. After the line is connected and checked, turn on the power; the power indicator on the controller will light up. 3. Long press the up button, the work indicator will flash slowly after 3 seconds. At this time, press and hold the button on the remote control, and the work indicator will flash 2 times quickly, indicating that the up button is successfully paired. 4. Long press the down button, the work indicator will flash slowly after 3 seconds. At this time, press and hold the key on the remote control, and the work indicator will flash 2 times quickly, indicating that the down button is successfully paired. (After finishing the study, press the up or down button on the remote control to see the work indicator light up) Otherwise, please study again. 5. The buttons on the controller and the buttons on the remote control can work in linkage and use each other. B. Clear code 1. Long press the up button or down button of the receiving controller, the work indicator flashes slowly 3 times after 3 seconds, and the work indicator flashes 3 times quickly after 8 seconds, which means the code clearing is successful. (After the code is cleared successfully, all the remote controllers that have been coded cannot be controlling the receiving controller. Please re-code the code if you need to use it) 11.This Controller Perfectly suitable for Tubular Motor, the controller Terminal for Tubular Motor 4 pcs Lines,( Tubular Motor Yellow Green Line connect to GND).This controller with no limited switch Terminal, Tubular Motor itself with Limited Switch . Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency 3.Package Included: A 1 x Receiver 1 x Transmitter ( with battery ) B:2 x Receiver 1 x Transmitter ( with battery ) C:3 x Receiver 1 x Transmitter ( with battery ) D:3 x Receiver 2 x Transmitter (with battery) E: 1 x Receiver