PULSOKSYMETR INTEC 310 Non-invasive pulse and saturation measurement Two-color OLED display Measurement function at low perfusion Visual and audible alarm system Anti-shock sensor 6 display modes Easy reading of results Aesthetic case Pulsoksymetr is a device that non-invasively measures the level of oxygen saturation (SpO2) of hemoglobin. This device is suitable for both hospital and home use. It is especially useful for people suffering from lung diseases and the krążenia.Pomiar system of pulse and saturation is carried out using a special infrared sensor, and if irregularities are found, the user will be notified with an alarm. It allows, using the appropriate SpO2 saturation sensor, to measure: - pulse - the number of heartbeats per minute. The pulse can slow down or accelerate under the influence of effort, emotional state, medications, etc disease. - saturation (SpO2), which determines the level of oxygen saturation of hemoglobin. Pulsoksymetr calculates the numerical level of %SpO2. The correct level: above 95% - during oxygen therapy 99-100%. Lower values (especially below 90%) may indicate respiratory failure/hypoxia. - pulsoksymetr usually also shows the SpO2 PLETH curve*, pulse strength and perfusion index* [PI] Pulsoksymetr supports doctors in identifying cases of hypoxia that are not obvious based on physical assessment. Technical data Power supply: 2 alkaline batteries 1,5 V AAA Operating temperature: 10C to 40C Service at altitude: 0-2000 m Dimensions: 62 x 34 x 31 mm Weight: ok. 50 g