Motion detector suitable for indoor use for recessed and surface-mounted ceiling mounting, dimensions 79x40mm. This motion detector can be installed in the ceiling (recessed) or directly against the ceiling using a screw adapter (surface-mounted). The motion detector has a maximum consumption of 800W for incandescent lamps and 400W for LED lamps or other economical bulbs. The area covered by this infrared sensor is 8m with an angle of 360. Its operating cycle is from 10 seconds to 30 minutes. The recessed motion detector can also be adjusted according to the ambient brightness (between 3 and 2000 lux in the covered area). infrared for indoor ceiling mounting Detection range up to 8m, detection angle 360 After a predefined time of approx. 10 seconds and 30 minutes, the motion detector turns off again. Using a regulator, it is also possible to adjust the trigger sensitivity of the device depending on the ambient brightness (between 3-2000 lux in the covered area). Maximum consumption: 800W for incandescent lamps / 400W for LED lamps or other energy-saving bulbs Housing material: Plastic Protection index: IP20 Recessed Indoor Motion Detector Ceiling Mount programmable Infrared LED sensor Suitable for recessed and surface mounting This motion detector can be installed in the ceiling (recessed) or directly against the ceiling using a screw adapter (surface-mounted) Adjustment possibilities of the IR sensor Motion detector indoor recessed Ceiling mounting programmable Infrared LED sensor Indoor recessed LED motion detector suitable for wall mounting IR sensor range 9m/160 Detection field The infrared sensor detects movements in an area of up to 8m for a coverage angle of 360 and turns on the lighting device. Operating cycle p> How long should your lighting devices stay on? The duration of the operating cycle can also be adjusted, either continuously or according to specific time periods. As soon as the sensor detects new movements, the operating cycle starts again. Ambient brightness Should your lamps only come on at night? No problem, you can decide whether the sensor triggers your lighting during the day or at night. The sensor can either be adjusted continuously depending on the ambient brightness or during the day or night.