Function: 1. 2.5mm2 wire with 2‑3 pole tip, 1 is the fire line input line, 2 is the neutral line output line, supports 12‑250V wide voltage input. 2. Rear rail hole for easy mounting on 35mm rails. 3. The PC material housing has heat resistance, high impact resistance and other physical and mechanical properties. 4. Excellent electrical insulation, elongation, dimensional stability and chemical resistance. High durability. 5. The task of the mechanical humidity controller MFR012 is to control the electric heating in such a way that the dew point at a key moment raises the relative humidity by over 65%. In this way, condensation and corrosion are effectively prevented. Specification: Item Type: Humidity Controller Specifications: Relative humidity 4% (tolerance 3%) Permissible air flow: 15 m / sec Contact type: Contact to convert Contact resistance: 100,000 cycles Exchange capacity: 20VAC / DC100mA Voltage and Current: 250 VAC, 5 (1) A250V 5 (1) A. DC 20WDDC 20W Electromagnetic Compatibility: EN 61000-3-2, EN 61000-3-3 55014-1-2 Connection: 1.5 mm 2 - 3-pole clamp 2.5 mm², clamping twist 0.5 Nm Highest: rigid wire 2.5 mm², steel wire (end with wire) 1.5 mm² Mounting: 35mm DIN rail, EN50022 Housing: Plastic according to UL94 V - 0, light gray Size: 67 x 50 x 38mm / 2.64 x 1.97 x 1.5in Weight: 60g / 2.12oz (Approx.) Operating / storage temperature: 0 to and 60 ° C (and32 to and 140 ° F) / -20 to and 80 ° C (-4 to and 176 ° F) Protection type: IP20 Approval: CE x At 50% relative humidity Package list: 1 x humidity controller