Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

₩26,990
+ ₩17,999 배송

Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

  • 브랜드: Unbranded

Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

  • 브랜드: Unbranded
희망소매가격: ₩33,190
가격: ₩26,990
절약 금액: ₩6,200 (18%)
판매자::
₩26,990
+ ₩17,999 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Temperature function:1. Automatic recognition of working mode 2. Cooling 3. Heating 4. Temperature correction function; Humidity function:1. Automatic recognition of working mode 2. Dehumidifying 3. Humidifying 4. Humidity correction function Remotely reading/setting of parameters ,Real-time reporting of temperature/humidity ,Relay enable function (enabled by default) Set Parameter:1. Working Mode:The system automatically recognizes the working mode according to the starting/stopping temperature and the starting/stopping humidity. 2. How to set the starting/stopping temperature function?Hold press the "TM+"/ "TM-" button for more than 3 seconds to enter the startup/stop temperature setting interface. The parameters can be changed by the "TM+" and "TM-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit. 3. How to set the starting/stopping humidity function?Hold press the "RH+"/"RH-" button for more than 3 seconds to set the minimum/maximum value of humidity. The parameters can be changed by "RH+" and "RH-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit. Model Number:XY-TR01 Style:Embedded Max Measuring Temperature:50C - 69C Display Size:1.9 Inches & Under :Temperature Controller Display Type:Digital Type:K Usage:Industrial Screw:1/4 inch Power Type:Charger Temperature range:-20 -60 Celsius Humidity range:00% -100%RH Control accuracy:0.1 Celsius, 0.1%RH Detection probe:integrated sensor Output type:relay output Output capacity:maximum 10A Usage: Step 1:Connect sensor to controller :Connect to power supply to controller Step 3:Adjust Start Temperature,Stop temperature and Temperature Correction Step 4:Adjust Start Humidity,Stop Humidity and midity Correction Step 5:Enable relay output according requirement; Step 6:Remove power supply Step 7:Connect to load with power supply at relay output terminal if need at Step5 Step 8:Connect to power supply for controller again Step 9:Test and working colour:blue Material:Plastic + metal Size:57*60*20mm Package Contents: 1 * Humidity and Temperature Controller with SHT20 Sensor Probe Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • 브랜드: Unbranded
  • 카테고리: 센서
  • 색상: blue
  • Fruugo ID: 347560778-759386436
  • EAN: 7306072336898

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark

배송 및 반품

3일 이내에 발송됨

  • STANDARD: ₩17,999 - 배달 사이 수 08 10월 2025–수 15 10월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기