Sensor cable extendable up to 50 meters; 0-99% RH control range; high accuracy; additional outputs include two configurable outputs. Features include heating and cooling mode options; humidifying and dehumidifying mode options; temperature and humidity output delay protection; high and low temperature and humidity alarms; sensor failure alarm with output protection; and temperature and humidity calibration capability. Output R1 activates on high temperature or high humidity and can drive an exhaust fan or alarm indicator. Timer functions: R1 can periodically control an exhaust fan; R4 and R5 are timer outputs that can drive devices such as incubator egg turning trays; R4 and R5 can be manually activated via control buttons for adjustable angle operation of egg trays. Suitable for incubator control; swiftlet and swallow nest humidity control. Power supply: 100240V AC, 50/60Hz. Sensor: factory-installed cable length is 2 meters. Accuracy: temperature 1% at 25C; humidity 3% (with sensor -SHr05J), 2% (with sensor -SHr05P). Setting range: temperature 0.065.0C; humidity 080% RH (U9=0 with -SHr05J), 099% RH (U9=1 with -SHr05P). Display range: temperature -20.0 to 80.0C; humidity 099% RH. Outputs: Temperature control relay (R3) rated up to 5A; Humidity control relay (R2) rated up to 5A; Multi-function relay (R1) rated up to 3A; Timer relays (R4 and R5) rated up to 1A each. Operating environment: -10 to 45C, up to 85% RH, non-condensing. Installation cutout dimensions: 71mm (W) x 29mm (H). Protection rating: IP65 (front panel only). Type: A; color: black; material: plastic; product dimensions: 7.8 x 3.5 x 7.1 cm. Package includes: 1 x automatic incubator controller. Note: Other accessories shown in images are not included. Note: Screen display and lighting may cause slight color variation between image and actual product. Measurement tolerance: 13 cm.