Clock Movement Details: High Torque Clock Movement Replacement with Hook, Long Shaft, Drive Long Clock Hands (10mm to 450mm) Overall Length of Clock Movement shaft: 20 mm (4/5 inch), with 11.7 mm (9/20 inch) thread length, second second movement suits for clock panel 4 - 8 mm (4/25 - 3 /10 inch) Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inch long; The minute hand is about 305 mm/ 12 inches Package content: 1 clock movement with hook, 2 hands and some mounting hardware, comes with a specially crafted carton box designed and instructions Warm notice: there are some aluminum clock parts, please don't install them with too much pressure, otherwise they will be bent Product Description High Torque Quartz Clock Movement Replacement Clock Mechanism With 12 Inch Long Spade Hands For DIY Clock Features: The total shaft length is 20mm and its thread length is 15.4mm, applicable for 9-13mm (9/25-1/2 inch) thick clock panel. Application request: Repair, replace or make a clock, suitable for cross stitch, three-dimensional embroidery, craft clock, draw clock frameless, etc. Easy and simple to design see: The components are easy to assemble and the black metal hands can be painted any color to match your clock. Specifications: Material: Plastic and Aluminum Case Size: Approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inch) Hour hand length: total length: 216 mm/ 8.5 inch; Center hole to end: 203 mm/ 8.0 inch Needle length: total length: 385 mm/ 15.2 inch; Center hole to end: 305 mm/ 12 inch Power: 1.5V AA 1 x battery (not included) Package includes: 1 x Quartz Clock Movement 1 x Close Nuts 1 x Second Hand 1 x Hand Minute 1 Hour needles 1 x Plastic Washer 1 x Brass Washer 1 x Brass Nut Warm Notice: There are aluminum watch parts, do not install them with too much pressure, otherwise they will be bent.