Green Leaf Sticker, Cool Skin, For Ps3 Controller, Playstation, Remote Control

Green Leaf Cool Skin Sticker for PS3 Playstation Remote Controller Gamepad Descriptions: Comfortable to feel, convenient to carry. Protect your console from dusts, scratches, dirt and scratches. damage. Easy access to all function keys without removing the case. Type: Skin Sticker Media: Video Game Install 1) Clean the surface of your controller as thoroughly as possible. Use rubbing alcohol on a Cloth to remove any grease or other contaminants. Most non-sticking issues are due to Some type of oil or grease that gets on the device before installation. 2) Peel off a piece of skin from the paper liner . Do not let the adhesive side touch anything. 3) Determine the location, apply the skin to the surface using your fingers or the side of your thumb, starting at one corner and working your way across the surface. 4) If a piece of decal sticker doesn't go straight, you can gently pry the sticker upwards. Do not stretch it from its original size. 5) If installed slowly and carefully, there should be no air bubbles under the skin of the sticker. Any air that may be trapped under the skin of the sticker during installation will disappear in time. You can also use a pin to break it off. 6) In cold weather or for best result, apply hot air to the decal surface to activate the chemical agent after putting the sticker onSkin on your controller. Especially heating the surface of the edge. Allow at least 3 hours to cool before touching decal sticker skin. Using a hair dryer or heat gun is fine. Package includes:1 x skin sticker