Feature: 1. This generator set controller can effectively detect and display power supply voltage V, power frequency Hz and motor temperature. 2. Backlit LCD screen enables clear reading, which will also display all parameters and fault state for easier adjustment and maintenance. 3. Ultra‑small size along with intelligent control system makes the generator set controller suits perfectly for small gasoline generators. 4. Buckle design, flame‑retardant ABS shell, plug‑in terminal, embedded installation, compact size, sturdy structure and easy installation. 5. Equipped with anti‑vibration rubber ring, the generator controller also has waterproof and anti‑vibration panel, very durable for long use. 6. Input the remote start signal and detect faults, the controller will automatically cut off the fuel relay and turn off the electromagnet. Specification: Item Type: Generator Set Controller Material: ABS + Rubber ABS Charger: AC 50Hz 8~35V Function: Gasoline and diesel generator set control. . Package List: 1 x LXC706 Generator Set Controller1 x USB Cable2 x Fastener1 x User Manual Note: 1. Please modify the internal parameters of the controller in the standby state (such as selection of successful starting conditions, programmable input and output port configuration, various delays, etc.), otherwise an alarm shutdown or other abnormal phenomena may occur; 2. When setting each parameter, it must be within the permitted range of the item, otherwise the parameter cannot be changed; 3. The overvoltage exceed the undervoltage threshold, otherwise there will be both overvoltage and undervoltage; 4. The overspeed value exceed the underspeed threshold, otherwise there will be both overspeed and underspeed; 5. The generator frequency should be set as low as possible, so that the starter separates quickly when the start is successful; 6. For the serial number of the setting item, refer to the aforementioned "7.1 List of Parameter Settings" (the serial y number of Table).7. When setting the fuel level sensor type, first set the programmable input port type to 0, and then set the fuel level sensor type.