specification:Item Type: for Tech2 Flash Tester_x000D_Material: ABS_x000D_Update: Via 32MB Software Card_x000D__x000D_Software Version: _x000D_32.007_x000D_Fits for SAAB English 148_x000D_Replacement for OPEL English 165 (Support Cars from 1997-2014)_x000D_English 149 (Support Cars from 1999-2013)_x000D_Replacement for SUZUKI English 01.210.020_x000D_Replacement for ISUZU English K line 11.53_x000D_CAN line 107.021_x000D_Year Coverage of Diagnosis: From 1992 to 2013, With Help of for Tis2000 Software, It Can Do Programming for Cars Before Year 2007_x000D__x000D__x000D_Notice:_x000D_1. It Can Only Support 12V Cars, No Trucks_x000D_2. One Device only Has One 32MB Card As Default_x000D__x000D__x000D_Description:_x000D_The for Vetronix Tech 2 comes with Authentic software and provides support for on board diagnostics on all systems 1992-2011._x000D__x000D__x000D__x000D_Specification:_x000D_1) Microprocessor: 32 bit,16 MHz_x000D_2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion._x000D_3) Communications: Integral RS232 communication port._x000D_4) Screen: 3.8.8 backlit with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)_x000D__x000D__x000D_An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all vehicle applications, even those vehicles using other platforms such as OBD I and OBD II._x000D__x000D__x000D_The Following Vehicles Utilize The CAN Interface_x000D__x000D_Fits for Allure (3.6L) 2005_x000D_Fits for LaCrosse (3.6L) 2005_x000D_Fits for Rainier (5.3L) 2005_x000D_Fits for Rendezvous (3.6L) 2004-2005_x000D_Fits for CTS (3.6L) 2004-2005_x000D_Fits for SRX (3.6L / 4.6L) 2004-2005_x000D_Fits for XLR (4.6L) 2004-2005_x000D_Fits for STS (3.6L / 4.6L) 2005_x000D_Fits for Cobalt (2.2L) 2005_x000D_Fits for Corvette (6.0L) 2005_x000D_Fits for Equinox (3.4L) 2005_x000D_Fits for TrailBlazer (5.3L) 2005_x000D_Fits for SSR (6.0L) 2005_x000D_Fits for Envoy (5.3L) 2005_x000D_Fits for G6 (3.5L) 2005_x000D_Fits for GTO (6.0L) 2005_x000D_Fits for Pursuit (2.2L) 2005_x000D__x000D__x000D__x000D_Built in Card: 32MB PCMCIA card (included) Features: 1Applicable Model with CAN Interface: Fits for Allure (3.6L) 2005, for LaCrosse (3.6L) 2005, for Rainier (5.3L) 2005, for Rendezvous (3.6L) 2004?2005. 2Practical in Use: Could update via 32MB software card, removable hardware modules provide insurance against scan tool obsolescence, and has large, easy to read backlit screen. 3Main Function: Capture stored DTCs, freeze frame, and failure record for later review, view status of diagnostic tests as they run, provide bi directional control when performing power train, chassis, and body diagnostics. 4Specification: Microprocessor: 32 bit,16 MHz, memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications: Integral RS232 communication port. 5Installation: CAN diagnostic interface module connects between the diagnostic link cable and the OBD adapter, comes with Authentic software and provides support for on board diagnostics on all systems 1992?2011. PackageList: 1 x Tester (With 32mb Pcmcia Card) 1 x Can Diagnostic Interface Module (With Manual) 1 x RS232 Cable 1 x RS232-DB9 Adapter 1 x DLC Cable 1 x DLC Loopback Adapter 1 x 12V Cigarette Lighter Power Cord 5 x Adapter Connector 1 x Battery Power Cord 1 x Connector Module 2 x Tis 2000 CD