For Nintendo Switch Controller Wireless Bluetooth Gamepad Oled/lite/pro Game Console With 6-axis Vibration Wake Up Nfc Function

₩52,990
+ ₩18,099 배송

For Nintendo Switch Controller Wireless Bluetooth Gamepad Oled/lite/pro Game Console With 6-axis Vibration Wake Up Nfc Function

  • 브랜드: Unbranded

For Nintendo Switch Controller Wireless Bluetooth Gamepad Oled/lite/pro Game Console With 6-axis Vibration Wake Up Nfc Function

  • 브랜드: Unbranded
희망소매가격: ₩70,590
가격: ₩52,990
절약 금액: ₩17,600 (24%)
판매자::
₩52,990
+ ₩18,099 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Product parameters: Product packaging size: 16 * 15 * 6.5cm;Product weight: 330g;Product material: ABS plastic;Product packaging content: 1 * handle + 1 * charging cable;Battery capacity: 3.7V 1300mAh, with a battery life of about 5 hours; Bluetooth handle operation instructions: 1. Host settings#1. To connect the Bluetooth handle, the Controller Connection (Bluetooth) option on the host should be On, or Flight Mode should be turned off;#2. On the main page, select Controllers ->Change Grip/Order to put the host in the state of searching for Bluetooth devices (this operation is not required for reconnection);#3. Note: If it is difficult for the host to pair handles, it is poible that the host is connected to too many Bluetooth devices and needs to manually clear Bluetooth information (System Setting>Controllers and Sensors>DisConnect Controllers);2. Handle pairing hostWhen the handle is turned off, pre and hold the small button next to the TYPE USB for 3 seconds to enter the code checking state. The 4 LEDs are in the fast flow light state, and the channel indicator light corresponding to succeful connection is constantly on. If the synchronization is not succeful within 1 minute, it will automatically sleep;If the Bluetooth connection is succeful, the corresponding channel indicator LED remains on (aigned by the Switch host);3. Handle connected back to the hostWhen the handle is turned off, pre any key to wake up the handle. After being awakened, it will automatically connect to the paired host for reconnection. If the reconnection fails within 6 seconds, it will automatically sleep;After the handle is succefully connected, if it does not operate, it will enter a sleep state according to the host system sleep setting. The host screen will close, and the handle will automatically sleep;4. Low voltage alarmIf the voltage of the lithium battery is lower than 3.55V 0.1V, the current channel light flashes quickly to indicate low voltage;If the voltage of the lithium battery is lower than 3.45V 0.1V, it will automatically sleep;5. Handle testKey testing: System Setting ->Controllers and Sensors ->Test Input Devices3D testing: System Setting ->Controllers and Sensors ->Calibrate Control Sticks6. RESET testingPre the small button next to TYPE USB to close the handle;7. Use distanceAcceible operation for about 8-10 meters;
  • Fruugo ID: 266105792-587577140
  • EAN: 9085801769906

배송 및 반품

24시간 이내에 발송됨

  • STANDARD: ₩18,099 - 배달 사이 수 15 10월 2025–목 23 10월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기