TF card, also known as micro-SD card, has the characteristics of small size, large capacity, earthquake and moisture resistance, high temperature resistance, stable performance, permanent and effective data preservation, no noise, and no error. It is a popular mainstream product memory card today. This riser card implements the conversion of the TF (micro-SD) card into an SSD of the NGFF (M.2) interface. Application areas: industrial computer motherboard, industrial computer, tablet PC, soft router, POS machine, hard disk video recorder. Compatible with for DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems. Equivalent industrial use flexible plug-in and unplug SSD, TF as a mobile hard disk to achieve flexible movement of data storage. After the hard disk is transferred, it can be used as a system boot disk or a data disk. TF supports high-speed cards. TF has measured a maximum support of 128GB so far, and there is theoretically no upper limit. Compatible with for SATA GEN1 and for GEN2, the transmission rate is 1.5Gbps and 3.0Gbps, respectively. The data transmission rate reaches 150MB/s and 300MB/s, respectively. Size: Compatible with NGFF (M.2) SSD size. Can be used on desktops and . Please notes: Before using this product, please insert the TF card into the corresponding TF socket, and then insert the NGFF (M.2) slot in the shutdown state. After powering on, the LED light flashes, indicating that the TF card data reading is normal. After the initial use or change of TF card configuration, the TF card needs to be initialized and formatted. Once the formatting is complete, you be to perform any data manipulation on your TF card. Colour:As Shown Material:PC Package Contents: 1 x M2 B key to Micro-SD Adapter(Due to different product tches, the appearance , which does not affect the use) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.