IPS LCD Kits No need cut Newest Clear Transparent housing for Gameboy Advance SP IPS GBASPLCD V2 Backlight Screen with shell case The mainboard of the console, hinges and battery are not included. The gla screen lens contains logo. The housing is the newest design. No need cut. It can be compatible with the backlight LCD very well. The conductive pads can glow in the night. *This IPS backlight LCD has 10 Levels of brightne. * It can suitable for AGS-101 and AGS-001. *The gla screen lens has been sticked to the LCD display If you want all 10levels of brightne you willneedto solder one wire from the motherboard onto the screen. The solder point is Q12B on the motherboard. Product Description: * Suitable for GBA SP gamepad consoles. * With fully fitted LCD screen, no need buy lens. * The replacement is relatively simple and does not require complicated modifications, connect and use. * Help to replace the broken screen, repair the old game machine. * Wide color gamut, ultra-high contrast IPS screen with a viewing angle of 178 degree. * Reduce the reflection to make the color more vivid, and never get into the ash. * The original brightne adjustment button function is retained for brightne adjustment, and support 5-level brightne adjustment. (Need to weld one wire) Product inlcuded: 1 x LCD Screen 1 xWelding Wire 1 x Foam 1 x Ribbon Cable 2 x Screw drivers 1x Pre-cuthousing set (Buttons,shell, Conductive pads, stickers included. Hinges are not included)