Product Description: Material:plastic,stainless steel Color:Blue Normal Temperature Resistance:10 (Ω) ​Features: 1. The weight of the hand-held electric pen is only 40 grams. 2. You can start cutting from any part of the foam board. 3. Can be easily cut into any shape. 4. The heating thin tube is made of stainless steel and has a diameter of only 2mm. 5. Preheating speed is fast, it can be heated to 210 °C within 10 seconds. 6. With wire control switch, it is safer and more convenient to use. 7. Especially suitable for small craft model making, advertising font making, student manual model making and so on. Package Include: 1 x Foam Cutting Pen Note: 1. Suitable for cutting medium and low density foam, pearl cotton, can not cut sponge, can be bent. 2. Only the adjustable temperature power supply can use different lengths of pen. Take the adjustable temperature power supply before sending the temperature adjustment, otherwise it is equipped with a special matching power supply, thank you! 3. This electric knife makes cutting foam more convenient. 4. The electric pen can be bent and used. After the new one is received, it can be bent. After heating, it can't be bent. A pen can only be bent once. It can't be repeatedly bent. After bending, it can't be straightened again. Once it is formed, it will break. ! 5. Single use for 30 minutes, use 30 minutes to rest for more than half an hour, no more than 3 hours a day. 1. The weight of the hand-held electric pen is only 40 grams. 2. You can start cutting from any part of the foam board. 3. Can be easily cut into any shape. 4. The heating thin tube is made of stainless steel and has a diameter of only 2mm. 5. Preheating speed is fast, it can be heated to 210 °C within 10 seconds.