A VoltUp Power Board has two output terminals, which can be used to power two high-voltage driver modules. This boost module supports a power input range of 12V-36V, with selectable output of either 48V or 60V (configured via jumper caps).At 48V output, the motor current can be set up to 2A, while at 60V output, the maximum motor current is 1A.The two VCC FAN interfaces provide voltage consistent with the power input, and the output voltage matches the power supply voltage. The module is equipped with mounting holes for a 4010 fan, which is essential for heat dissipation due to the significant heat generated by the boost module.It also features a built-in reverse polarity protection diode to prevent damage from user errors. Usage Precautions: Both 48V and 60V are non-safe voltages; all operations must be performed with the power off, and proper leakage protection should be in place to prevent . Do not insert both voltage selection jumper caps simultaneously to avoid damaging the components. correct connection of positive and negative terminals to prevent component damage. Color:Black Material:PCB Package Contents: 1 * Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.