1. Bending sensor. The degree of bending of the sensor can be translated into a change in resistance value. The more the bend, the higher the resistance. This sensor can be used to make an energy glove2. Bending direction: the side with the word is the inner side when bending. Avoid bending pin portion (. the part that is not bent) during use, as damage may resultProduct Description: Model: Flex Sensor 4.5inchTechnical Specifications Straight Resistor: 25K ohmsResistance Tolerance: +30% BendResistance change: 60K-110K ohmsRated Power: 0.5 Watt Power: 1 WattBending life: Greater than1 million timesWorking temperature: 35C~+80CCenter Length x Width: 73.66x6 35mmInterface type: 2-pin metal pins (0.1 pitch)Torque sensor, for electronic gloves. When the sensor's metal bends outward, the resistance of the sensor changes and the bend can be detected.Non-bending state resistance: -9000 ohms90 degree bending resistance: 14000 ohms180 degree bending resistance: 22000 ohmsPrinciple: Current SensorApplication: pressure sensorType: Vibration SensorOutput: Analog Sensorsize: 11 x 1 x 1cmMaterial: ABScolour: yellowPackage Contents: 1 x Flex sensorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.