Eye Cover Nebulizer Atomizer Low Noise Relieve Strain Fade Dark Circles Eye Care Misting Steamer Item Type: Eye Cover Nebulizer Atomizer Material: ABS How e 1. Forbid to turn on the machine without water! 2. respectively, remove the host transparent cover, atomization cup, in the water tank filled with pure water temperature between 20-40 ℃ (water temperature below 20 ℃ will reduce the effect of atomization, water temperature higher than 40 ℃ will damage the water cup), so that the water surface is located in the water tank scale line 3. Place the fogging cup in the middle of the transparent seat, add room temperature fogging liquid to the fogging cup (please do not add thick, gel like or containing particles of liquid, concentrated liquid, please dilute), so that the bottom of the fogging cup and the water surface of the sink contact, do not add water to the air outlet, and then put the transparent lid back into position. 4. Connect the telescopic tube and eye cover cover to the transparent upper lid. 5. ①The default fogging time is 5 minutes, click the timing key to set the time according to your needs. ②Click the run key, the fogging instrument is turned on, the default is room temperature fog ③Click the heat key, light up the red light to adjust to hot fog after wearing the eye cover cover.6. Timing countdown is over, the main machine will sound a drop, drop, drop beep, in the process of use, when you need to turn off the nebulizer, you can click the run button to stop working, it is strictly prohibited to open the transparent upper cover in the running state. After use, disconnect the power supply, remove the telescopic tube and the eye cover cup and empty the sink and the nebulising cup of liquid. Clean the sink, the atomising cup, the transparent seat, the transparent lid, the telescopic tube and the eye cover cup and keep the appliance dry for the next use.