Function: 1. Stainless Steel Material: The pool heat exchanger is made of high quality corrosion resistant stainless steel, rust and salt water resistant, durable. 2. Constant temperature: it is heated by water, and cold water is converted into hot water by means of heat energy, which is heated circularly. Suitable for simultaneous use of solar panels (supplied without solar panels). 3. Maximum heat transfer: The specially designed built-in ma flow limiter to minimize pressure losses in the heating system and ensure maximum heat transfer. 4. Space-saving: equipped with fixed stainless steel bracket, easy to install and operate. Small and compact size, light weight. Minimum installation space is required. 5. Application: Heat recovery pool heater is suitable for swimming pools, spa, jacuzzi, solar heating, plumbing, oil cooling, heat recovery, snow melting, etc. . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING Specification: Item Type: Pool Heat Exchanger Material: Stal Weight: approx. 2837 g/100,07 oz Size: 34.2x15.7cm/13.46x6.18in Technical data: 40 kW Side thread: 45mm/1,77 inch female thread Front and rear thread: 32mm/1,26 inch female thread Maximum working temperature: 230 (110 ) Purpose: Suitable for all types of pools, spas, and hot pools and spas Heat exchanger type: MF 135 Application scenario: swimming pool, hot springs, hot tub Pool area: 12000 gallons, temperature required to rise by 1 /h: 100098 btu/h; temperature rise by 2 /h required: 100098 Pool area: 14000 gallons, temperature required to rise by 1 /h: 116781 btu/h; temperature rise by 2 /h required: 133464 Pool area: 16000 gallons, temperature required to rise by 1 /h: 133464 btu/h . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING List of packages: 4 x part 1 x Heat Exchanger 1 x Manual 1. First, determine the rate of increase in the water temperature in the pool. In general, the increase in pool temperature, which is open for a long time in the summer, is 1 per hour (1 0, 56 ), while the increase in pool temperature, which is used only for a short time, is 20 per hour; 2. Calculate pool volume (in gallons: 1 cubic meter 264,2 gallons) 3. Check the table below, select the heat exchanger model according to the pool water volume and the required heating rate, and make sure that the boiler output power meets the requirements given in the table; 4. Calculate the heat loss coefficient so that the boiler output power is greater than the heat loss coefficient calculated from the formula: heat loss coefficient (btu/h. )233,28 x Swimming pool area (square) meter) x (pool water temperature required — lowest average outdoor temperature during use) . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING . POOL HEAT EXCHANGER MF135-40KW HEATING