Features: 1.ESP32-S3 WROOM is designed based on the ESP32S3-WROOM-1 module with PCB onboard antenna. 2. The ESP32-S3 development board can be paired with cameras. 3.ESP32-S3 is a low-power MCU system-on-chip (SoC) that integrates 2.4 GHz Wi-Fi and low-power Bluetooth dual-mode wireless communication. 4. ESP32-S3 has a complete Wi-Fi subsystem and low-power Bluetooth subsystem, has industry-leading low-power performance and radio frequency performance, supports a variety of low-power working states, and can meet the power requirements of application scenarios. consumption demand. 5. The ESP32-S3 chip provides rich peripheral interfaces and has a variety of hardware security mechanisms. The complete security mechanism enables the chip to meet security requirements. Digital interface: - 4xSPl - 1xLCD interface (8 bits - 16-bit parallel RGB, l8080, MOTO6800), supports conversion between RGB565, YUV422, YUV420, and YUV411 - 1xDVP8-bit~16-bit camera interface -3xUART -2xl2C - 2x 12S - 1xRMT (TX/RX) -1x pulse counter -LED PWM controller, up to 8 channels - 1x full speed USB OTG - 1 x USB Serial/JTAG controller - 2x MCPWM - 1 x SDIO host interface with 2 card slots -General DMA controller (GDMA for short), 5 receive channels and 5 transmit channels - 1xTWAI controller, compatible with IS011898-1 (CAN specification 2.0) Analog interface: - 2x12-bit SAR ADC, up to 20 channels - 1x temperature sensor -14x capacitive sensing GPIO Timer: -4x54-bit - 1x52-bit system timer - 3 x watchdog Material: PCB+electronic components colour: black Package Contents: 1 x development board 2 x pin header 1 x OV5640 Camera Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.