ESP32-S3 Development Board with LCD Display ESP32 S3 Development Board 28 Inch

ESP32-S3 Development Board with LCD Display ESP32 S3 Development Board 28 Inch 1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz_x000D_ 2. Support 2.4GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), onboard antenna, onboard 512KB , 384KB ROM, 8MB PSRAM and 16MB Flash_x000D_ 3. Onboard 2.8-inch touch screen, 480 x 640 resolution, support I2C interface to control touch, support interrupt (only with touch version)_x000D_ 4. Lead out UART, I2C and some IO interfaces, integrated full-speed USB serial port_x000D_ 5. Onboard QMI8658 six-axis sensor, clock sensor, Micro-SD card slot and battery charging management module, etc. Support flexible clock, multiple power modes and other accurate control, to achieve multi-scenario low power mode_x000D_ Display panel: IPS LCD_x000D_ Display resolution: 480 x 640_x000D_ Communication interface: SPI + RGB_x000D_ Display size: 2.8 inches_x000D_ Display color: 65K_x000D_ Driver IC: ST7701_x000D_ Specification:without touch_x000D_ The product appearance and printed words depending on the batch, but this does not affect use_x000D_ Colour:Black_x000D_ Material:PCB+LCD Package Contents:_x000D_ 1 x IPS Display Kit Only the above package content, other products are not included._x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_