ESP32-S3 1.69-Inch IPS NO Touch LCD Display Development Board ST7789V2 SPI Display Module compatible with Arduino Python

₩60,690
+ ₩18,699 배송

ESP32-S3 1.69-Inch IPS NO Touch LCD Display Development Board ST7789V2 SPI Display Module compatible with Arduino Python

판매자::

₩60,690

할인 ₩228,200 (78%)

권장소매가

₩288,890
재고 있음
+ ₩18,699 배송

14일 반품 정책

결제 방법:

  • 브랜드: Unbranded

제품 상세 정보

제품 상세 정보

ESP32-S3 1.69-Inch IPS NO Touch LCD Display Development Board ST7789V2 SPI Display Module compatible with Arduino Python

ESP32-S3 1.69-Inch IPS NO Touch LCD Display Development Board ST7789V2 SPI Display Module compatible with Arduino Python Equipped with ESP32-S3R8 high-percompatible withmance Xtensa 32-bit LX7 dual core processor, with a clock speed of up to 240 MHz Supports 2.4 GHz Wi Fi (802.11 b/g/n) and Bluetooth 5 (LE), onboard antenna Onboard 1.69-inch LCD screen, 240x280 resolution, 262K color, capable of displaying color images clearly Onboard QMI8658 six axis inertial measurement unit (3-axis acceleration, off-axis gyroscope), capable of detecting motion attitude, step counting, etc Display version features: 1. Equipped with ESP32-S3R8 high-percompatible withmance Xtensa 32-bit LX7 dual core processor, with a clock speed of up to 240 MHz 2. Supports 2.4 GHz Wi Fi (802.11 b/g/n) and Bluetooth 5 (LE), onboard antenna 3. Built in 512KB SRAM and 384KB ROM, stacked with 8MB PSRAM and external 16MB Flash 4. Onboard 1.69-inch LCD screen, 240x280 resolution, 262K color, capable of displaying color images clearly 5. Built in ST7789V2 driver chip, using SPI does not occupy too many interface pin resources 6. Onboard QMI8658 six axis inertial measurement unit (3-axis acceleration, off-axis gyroscope), capable of detecting motion attitude, step counting, etc 7. Onboard PCF85063 RTC chip, reserved SH1.0 battery slot (supports charging), can easily meet RTC function requirements 8. Onboard RST, BOOT, and a customizable side button compatible with easy development of custom functions 9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface 10. Introduce 5 GPIO, I2C, and UART pins compatible with external devices and debugging, allowing compatible with flexible configuration of peripheral functions 11. Supports precise control such as flexible clock and separate module power settings, achieving low-power mode in multiple scenarios Color: Blue & Black Material: PCB Package Contents: 1 * ESP32-S3-LCD-1.69 Touchless Version Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is
  • Fruugo ID: 496283046-1021234237
  • EAN: 9137471969688
안전

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

배송

배달

5일 이내에 발송됨

  • STANDARD: ₩18,699 - 배달 사이 수 16 9월 2026–월 28 9월 2026

중국에서 발송.

반품

보고

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다.

전체 반품 정책 보기