High-performance MCUs equipped with RISC-V 32-bit dual-core and single-core processors ,128KB ROM, 16KB LP ROM, 768KB L2MEM, 32KB LP , 8KB TCM Powerful image and audio processing capabilities, with interfaces including a JPEG codec, pixel processing accelerator (), image signal processor (ISP), and 264 video encoder The chip package includes a 32MB PSRAM stack, and the module integrates a 32MB Nor Flash The board features common peripheral interfaces such as MIPI-, MIPI-, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.The board has 2 x 20 header pins, providing 28 additional programmable GPIO pins The security mechanisms include Secure Boot, Flash encryption, a hardware encryption accelerator, and a hardware random number generator. It also supports hardware access protection, enabling Access Management () and permission separation This product is a multimedia development board based on the ESP32-P4 and integrates the ESP32-C6, supporting Wi-Fi 6 and Bluetooth 5 (LE) wireless connectivity. It provides a rich set of human-machine interfaces, including MIPI- (integrated image signal processor ISP), MIPI-, SPI, I2S, , LED PWM, MCPWM, , ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. The board integrates an RJ45 Ethernet interface with PoE functionalityThe ESP32-P4 uses a 360MHz dual-core RISC-V processor, supports up to 32MB PSRAM, and features peripherals such as USB 2.0, MIPI-/MIPI-, and 264 encoding, meeting the needs of low-cost, high-performance, and low-power multimedia development.integrates digital signature peripherals and a dedicated key management unit to data and operational security Color:As Shown Material:PCB Package Contents: 1 * ESP32-P4-WIFI6 Development Board with accessories (The color and style of the cables and screws are random and cannot be specified.) 1 * Speaker 1 * camera 1 * touchscreen Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.