Welcome to our shop! This embossing label maker requires no ink or charging for permanent use. It uses a stamping principle, inverts the shape on the tape, automatically advances, cuts with a single button, and allows for quick disc changes. Create high-quality embossed self-adhesive labels with an intuitive rotating and pressing system. Ideal for scrapbooks, photo albums, and DIY projects. Easy to use, portable, and requires no batteries or power supply. Its mini, handy design makes it easy to carry and use on the go. Comes with 9mm special tape that's self-adhesive; simply peel off the backing to stick it to any smooth surface. Item Type: Embossing Label Maker Material: ABS Function: Perfect for scrapbooks, photo albums, and DIY projects Tape Length: Approx. 2 meters / 6.6 feet Tape Width: Approx. 9 mm / 0.4 inches Instructions: 1. Insert the tape into the white pinion port, press the handle continuously, and roll in the tape (note: the handle is pressed with two ridges, half of it is a space, and the bottom is for printing). 2. Move the tape to approximately the red line and start typing; the printed word will be in the center. 3. Manually rotate the dial, find the word to be printed, and press it firmly to the end; to print 1 and 0 for the number, replace the letter 1 and 0. 4. After printing, manually turn the dial to the scissors and press it to the end to cut the tape. 5. Tear off the adhesive and stick it where you want to stick it (the plane is firm). Remove the remaining tape after disassembling the turntable. Pulling it out can damage the tape. Changing Dial Steps: 1. Turn to the back of the label machine and press the center button. 2. The front logo push button can be pulled out. 3. Pull out the middle logo push button. 4. Take out the dial. 5. Insert the dial and install the logo. 6. The change is complete. Size: Approx. 5.4 x 10.8 cm / 2.1 x 4.3 inches 5.4 x 5.4 cm / 2.1 x 2.1 inches Includes: 1 x Embossing Label Maker 2 x Letter Dial 1 Tape Roll