Feature 1DC12V Electric Bolt Lock: The electric lock support DC12V input and 120mA operating current, 4 kinds of delay time can be adjusted: 0369 seconds. 2Anti Prying: Equipped with lock cylinder work detection LED light display and door detection signal output contact, solid structure design with strong anti prying capability. 3Parameters: The stainless steel deadbolt diameter is 12.8mm, the protruding length is 15mm, and the aluminum alloy structure is strong and durable. 4Time Delay: With door close time delay function, will lock until the door completely stop moving, rather than lock instantly, effectively protect the door and lock from damage. 5Aluminum Alloy: Made of aluminum alloy material, firm, antirust, durable to use, and is impact resistant and wear proof.Item Type:ElectricBoltLockMaterial:Aluminium alloy .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Working Voltage: DC12VWorking Current: Instantaneous starting current 1000mA, working current 120mAOpen Door Congratulation: The negative pole of the black wire is engaged with the orange wireLED Display: Deadbolt status indication, red light when deadbolt is retracted, green light when deadbolt is plugged outLocking Delay: 0-3-6-9 seconds adjustableDeadbolt Size: Diameter 12.8mm/0.50in stainless steel deadbolt, protruding length 15mm/0.59inInstallation Instructions:1. Read this manual in detail before use, checks whether the accessories are complete, and pays attention to the wiring method and installation precautions.2. This product is composed of lock body and door valve plate, the circumferential gap distance between the door valve plate and the electric lock shall not exceed 8mm during installation, so as to avoid insufficient magnet induction, pay attention to the lock tongue corresponding to the door valve plate hole.3. The electric lock wiring is led by red, black, orange, green, white, five colors. The red wire is connected to the positive pole of the lock (+), the black wire is connected to the negative pole of the lock (-), the green line and the white wire are the door signal, the white line is the common end (COM), the green line is normally open (NO), the orange line is the door opening contact line and the black line can be connected at the same time, and the door button can be connected.4. Lock delay setting, a total of four setting method, 0-3-6-9 seconds adjustable.Package List1 x ElectricBoltLock1 x Sticker10 x Screw2 x Gasket1 x Metal Patch1 x Keyhole Iron Sheet