1. Adopt advanced synchronous rectification switching power supply control chip design, switching power supply mode regulation system, with overcurrent and overheating protection functions, the chip efficiency is as high as 90%2. The output current is , the continuous output current capacity is 8A, and the output current capacity is 12A, which fully guarantees the power demand of the equipment3. The output terminal is equipped with an enable port. When the enable jumper is plugged in, the voltage output is turned off, and when the enable jumper is removed, the voltage output is turned on4. It has a wide voltage working range and can work normally within 7V-25.5V5. With LED working status indicator, the indicator lights up when the output is normal; if the LED does not , check whether the power input line is connectedProduct Usage:UBEC is an external voltage stabilizer, it works as a switching power supply and is used for high-current and high-voltage model equipment. Power supply for aerial photography , etc. using this product, confirm the rated voltage or withstand voltage of the equipment you are using, and correctly select the output voltage of UBEC.2. Product Specifications:Output: 5V/8A, 6V/8A or 7.4V/8A (may be switched by jumper cap)Input voltage: 7-25.5V (2-6 cell lithium battery pack or 6-16 cell NiMH/NiCd battery pack); the input voltage should be higher than the output voltage during useContinuous output current: 8A output current: 12A (the duration does not 15 seconds)Ripple: less than 35mVp-p (@8A/12V)Size: 45mm x 22mm x 7.5mm (L x W x H)colour: as shownMaterial: Electronic componentsPackage Contents:1 x 8A High Voltage UBECOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.