Consumables -DMX 512 Controller Module Highlights Generic Brand DMX 512 Controller Module Description: Small in size, easy to suit for indoor lighting access. Single key to operate, three-color LED display. The controller DMX512 standard data transmission, can also transmit DMX512 lighting and lighting data. 126 channels of automatic hopping frequency, high anti-jamming ability to ensure working reliability. 7 groups of ID codes adjustable, user can use 7 groups of individual wireless systems without any interference with each other in the same place. Specification: Input voltage: 5VDC Working frequency section: 2.4GHz ISM band, 126 channels Max frequency section transmitting power rate: 20dBm Sensitive receiver: -94dBm Signal port: RS485 or CPU serial port AURT. User manual: ID code and corresponding LED color correlation: 1: RED 2: GREEN 3: RED+AVIDITY = YELLOW 4: BLUE 5: RED+BLUE = PURPLE 6: GREEN+BLUE = CYAN 7: RED+ AVIDITY + BLUE = WHITE Press key 1 time for ID setting, Press again for IC, then ID value adding 1 each time by press. Working condition: LED constant litght up: no DMX or wireless signal. Red LED flash: emission. Blinking green LED: Receiving RF frequency ------ 2. 400-2. 525G, total 126 channels, it is searching automatically. ID code ------- ""1-7"" ID groups code, press ""key"" key for setting, it can only work under same ID code of the transmitter and receiver. Establishing communication: Turn on DMX512 wireless board transmitted and board received. Press "key" button to set same card ID value transmitted and board received, please use different ID value if you need to use more than 1 network group wireless at the same time in the same place. The red LED flashes when the transmitter transmits DMX data through no scrambled frequency section, frequency section then the communicated receiver changes. Blinking green until same corrected ID value received, LED flash faster once DMX data faster.Communication has been established correctly, then. Package includes: 1 x Wireless DMX512 PCB Module