Digital Display Temperature Controller 0300 High Precise Adjustable Thermostat 220V

₩21,990
무료 배송

Digital Display Temperature Controller 0300 High Precise Adjustable Thermostat 220V

  • 브랜드: Unbranded

Digital Display Temperature Controller 0300 High Precise Adjustable Thermostat 220V

  • 브랜드: Unbranded
희망소매가격: ₩28,590
가격: ₩21,990
절약 금액: ₩6,600 (23%)
판매자::
₩21,990
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Feature:1. The temperature control range is 0300, high temperature and high precise control.2. Intelligent digital display, easy to read data, adjustable temperature control switch.3. After the thermostat is powered on, the actual temperature will be displayed, press the up and down keys to adjust the temperature.4. Set the high temperature alarm value, if actual temperature exceeds this value, the screen and buzzer will prompt an alarm.5. When the power button is normally energized, press once to power on, and when the power button is normally energized, press once to power off.Specification:Item Type: Digital Temperature ControllerMaterial: PlasticColor: As Picture ShownProduct Fixing Hole Distance: Approx. M3/86mm/3.4inWeight: Approx. 58.0g/2.0ozTemperature Control Range: 0-300Control Temperature Accuracy: 1Power Supply Voltage: 220VData Storage: YesRelay: 10AHow to use:1. Confirm the working mode and hold down SET for 3 seconds to display PO, press SET again to modify the PO value, H is heating mode, C is cooling mode2. Set hysteresis value: Hysteresis is to start after the set temperature is stopped and the hysteresis value is added. The default is 2. If you need to modify it, please press and hold SET to enter P1 to modify.3. Set stop temperature: After setting the mode and hysteresis, directly press ENT to confirm and return. At this time, the screen displays the real-time temperature. Press a SET screen to display the stop temperature value, and then press the up and down keys to modify.Codes: CodesExplanation SettingRange FactorySettings P0 Heating/cooling H/C H P1 Return difference 3-30 5.0 P2 Set the maximum limit +300 300 P3 Set a minimum limit 0 0 P4 Temperature calibration +10~-10 0 P5 Delay start 0-10min 0 P6 High temperature alarm 0~300 OFF P7 Data locking ON-OFF OFF P8 Restore factory settings ON-OFF OFFFirst. temperature settingAfter the thermostat is powered on, the actual temperature will be displayed. Press the SET key once and the screen will flash. Press the up and down keys to adjust the temperature.Second. Long press the SET button for 5 seconds to enter the system settings. After setting, press ENT to confirm and return. During normal work, long press ENT to shut downThird. PO: working modeWhen the thermostat is used for the first time, this value should be set. If it is used for heating and heating, it is set to "H". If it is used for cooling and cooling, it is set to "C".P1 hysteresis settingThe return difference is the difference that the temperature controller needs to work again after it reaches the set temperature and stops. For example, if we set the heating mode and the temperature is 37-40 degrees, then the hysteresis is 3 degrees.P2-P3: Set limit heightThis function is to set the temperature limit range, not to participate in the design of the temperature setting. Under normal conditions, the setting range of the thermostat is -5~120. If you don't want that large range, you can use this function to shorten the setting value. range. If P2 is set to 50 and P3 is set to 20, then the setting range of the thermostat can only be set between 20-50.P4: Temperature correctionThis function is used for temperature calibration. If there is a deviation between the actual temperature and the actual temperature, you can use this function to calibrate. The corrected value = the measured value + the corrected value. For example, we measured the temperature to be 25.6 and the actual temperature is 25.8 degrees. Set to 0.2, then the displayed temperature is 25.6+0.2=25.8 degrees.P5: Delay startThis function is generally used for compressor refrigeration. If you buy this thermostat for refrigerator or freezer, then this value must be set. According to the size of the back pressure sent by the compression, the general setting value is 3-6 minutes. If it is not for controlling the compressor or Delay function is not required, this value is set to "0"P6: High temperature alarmSet the high temperature alarm value. When the actual temperature exceeds this value, the screen and buzzer will prompt an alarm at the same time. At the same time, the output will be cut off to protect the safety of the circuit. The alarm is displayed on the screen as "H""H""H", and the buzzer sounds "di", "di", and "di".P7: Data lockIf the set value needs to be protected to prevent others from modifying it at will, you can enter P7 and set it to ON after setting the parameters. After the setting is completed, the temperature and internal parameters cannot be modified. Unless you enter P7 and turn it offP8: Restore factory settingsWhen the set value is out of order or malfunction occurs, you can enter P8 and turn it ON to restore the factory settings, or you can press the up and down keys to power on and restore the factory settings.Forth: FunctionPower-on button: Press once to power on under normal power-on state. Power-off button: Press once to power off under normal power-on statePlus key: press this key in the standb
  • 브랜드: Unbranded
  • 카테고리: 축산업
  • Fruugo ID: 416520816-878880489
  • EAN: 7540131599064

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Warning: Please read the product instructions carefully before use to ensure correct use.
일련번호: 7540131599064

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 금 17 10월 2025–금 24 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795