TRY PROFESSIONAL SAT-FINDER What sets this set apart is: Professional use High measurement accuracy Easy operation Sound signaling, built-in compass and silencer Practicality IN THE SET YOU WILL FIND Instruction in Polish PRODUCT SPECIFICATIONS Power supply: DC 13-18V impedance: 75 Ohm frequency range: 950-2150 MHz minimum level at input: -40 dBm maximum level on input: -10 dBm display: illuminated LCD suppressor: yes, three-stage sound signaling: yes compass in housing: yes dimensions of the device: 12 x 6,5 x 2.5 cm antenna cable: 20 cm MODERN AND PRECISE The product on the tle of older models is certainly distinguished by its innovative design and application. The way of searching for the SAT signal is very important. It is displayed on electronic, backlit LCD displays, so you can quickly notice changes in the intensity of reception. EASY TO USE The product has been designed to make the antenna setting process fast and efficient. Thanks to the built-in compass in the housing, we can pre-determine the direction of the azimuth. The product also has a three-stage silencer, used to help receive Full HD, adjustable sound signal and diodes indicating the type of voltage and frequency. METHOD OF USE Connect the antenna cable to the left input of the signal meter, while the right input connects to the decoder. Za the knob located on the right side of the device, set the reading on the LCD display to 10%-20% (turning the knob clockwise increases the reading level). When the indicator has reached the maximum possible level, you need to turn the knob counterclockwise to reduce the reading level by about 50%. Retry the action as you change the antenna setting until you reach the maximum reading level. Attention! Do not use the meter directly under the antenna, then the measurement will be inaccurate.