Dental Orthodontic Brackets Braces Glue Bonding Self Curing Adhesive Paste Kit Condition: Item Type: Orthodontic Glue Storage Condition: Keep below 23℃ (Don't freeze) Curing Time: Less than 5 minutes Shear Bond Strength: MPaandgt;17.2 Application: Used for bonding various dental orthodontic accessories Usage: 1.Preparation of teeth: Clean the enamel surface of the teeth, remove the dirt on the teeth, rinse with water; isolate the teeth, and blow the tooth surface with an oil-free and moisture-free air gun. 2. Acid etching tooth surface: Apply the acid etchant to the tooth surface. After about 50-60 seconds, rinse thoroughly with water and blow dry. Note: The surface of the tooth surface after acid etching is chalk . If there is no chalky appearance, prolong the acid etching time. 3. Primer: use a small brush to brush a thin layer of liquid on the tooth acid etching surface, and use a other small brush to brush a thin layer of liquid on the bracket bonding surface (Keep moist) 4.Apply take a small amount of paste coated to already Applied liquid agent bracket bonding surface with a mixed rod to form a thin layer.Immediately after applying the paste, the bracket is bonded to the tooth surface,and the bracket position is placed in 20 seconds, and micro pressure 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. Orthodontic operation can be performed after curing for 5 minutes.