DC DC 30A 1500W Constant Current Electric Vehicle Power Supply Module

Specifications: Condition: Brand New Module Name: 2-in-1 Module 1500W constant current boost Module properties: non-isolated boost module; (BOOST) Operating temperature: -40~+85 degree Working frequency: 150KHz Efficiency conversion: 92%-97% (efficiency have effect on input voltage, output Voltage, current and pressure difference) Installation: 4pcs 3mm column Mode of connection: Terminal blocks (please use large current and pure copper wire) Module size: 130mm x 52mm x 84mm(L x W x H) Input voltage: 10-60V Current input: 30A (10-30V input) 25A (31-60V input) Static operating current: 15mA Output voltage: 12-90V continuous adjustable (default output 19V) Output current: MAX 20A, more than 15A please strengthen cooling (have effect on input And output, different pressure voltage, the smaller the pressure difference between input Voltage and output voltage, the smaller the current) Constant current range: 0.8-20A (+/- 0.3A)Output power: = input voltage ex 30A Feature: Overcurrent protection: There is a certain margin of error in the input greater than 30A. 35A, which automatically reduces the output voltage. Short circuit protection: there are (30A input fuse) double short circuit protection, safer to operate. use. Reverse polarity protection input: there is (150A MOS tube to avoid this). When using the boost power supply should pay attention to the following points: 1. Polarity cannot be reversed or short-circuited. 2. When using batteries as the input source, you must lower the protection of the battery, otherwise It will damage the battery and power supply 3. The input supply voltage must be greater than 10V. 4. When the power supply is used for the input power supply, the input power and the output of the input power supply come first. be discharged. Then pick up the load. (must Make sure the switching power supply has worked). 5. When constant current mode is used to adjust the voltage, the constant voltage must be greater than the input voltage. Do not use the short circuit output current, the circuit The structure of the boost module can not be adjusted by short circuit. 6. If the input voltage fluctuation range is less than the output voltage set, the output Voltage is constant, this is to ensure that the input is lower than the output voltage. the output voltage. Package Include: 1pc x 1500W Boost Module & constant current