Compatible with Pool Water Testing PH Probe 0-14 Detection Range

Heating voltage: 50.2V (AC/DC)Working current: 5-10mADetectable concentration range: PH 0-14Detection temperature range: 0-80℃Response time: 5SSettling time: 60SComponent power: 0.5WOperating temperature: -10 to 50℃ (rated temperature 20℃)Humidity: 95% relative humidity (nominal humidity 65% relative humidity)Module size: 42mm×32mm×20mmOutput: analog voltage signal outputWith M4 mounting holesWorking environment1. Ambient temperature: 5-40 degrees2. Environmental relative humidity: 85%Use, care and precautionsThe inside of the sensitive bulb is completely filled with liquid. If bubbles are found, gently shake the electrode to remove the bubbles in the sensitive bulb, otherwise it will affect the test accuracy.Calibration and testing of the electrode and the pH meter1. Connect the pH electrode to the input of the PH instrument and ensure the connection is correct.2. Perform calibration according to the instrument instruction manual and record the calibration result.Storage and maintenance of the liquid-filled composite pH electrode1. After use, clean the electrode with distilled water and place it in a protective bottle. It will be activated by injecting the solution before the next test.2. If the electrode is not used for a long period, it must be rinsed and the remaining distilled water must be absorbed.3. The sensitive glass bulb on the front of the electrode should not come into contact with hard objects. Any damage and scratches will render the electrode invalid.4. After long-term use, the electrode's slope and response rate may decrease. The sensitive bulb may be contaminated or the liquid junction may be blocked to passivate the electrode, the response speed will be considerably slower, the slope will be reduced or the reading will be unstable. Select the appropriate treatment method according to the nature of the pollutant.