Shop name:Chong Qing Shuo Yue Ke Ji You Xian Gong Si 1. Bottom heating is adopted, and the inner pot directly contacts with the heating ring at the bottom to conduct temperature, and the wax melting time is shortened by one-third compared with traditional products. The product adopts intelligent temperature control technology, which can accurately control the temperature of melting wax, so that the wax beans can reach the best drawing state, and will not burn the user's skin while removing hair. 2. The temperature can be adjusted and controlled up to 120 degrees Celsius. The shell has a remarkable heat insulation effect. Even if you accidentally touch it during the heating process of the machine, you don't need to worry about being scalded. (Note: Wax not included) 3. The inner pot is coated with , which is wear-resistant, beautiful and has a strong texture. The wax beans are not easy to stick to the surface, and it is easier to clean. In addition, the inner pot has a wax scraping setting, and the amount of wax used can be reduced according to need before waxing. 4. The Fahrenheit temperature and Celsius temperature can be switched arbitrarily (press and hold for 3 seconds to switch between the two temperatures), which caters to the usage habits of consumers in different countries and is easy to understand. 5.The wax melting temperature used last time will be memorized to the time. If you need to use the last wax melting temperature, you don't need to reset it. It can be done with one key, which is convenient and quick. Product Name: Smart Wax Melting Machine Power: 100W Voltage: 100-240V AC 50/60HZ Capacity; 500CC Operation introduction~ Step 1: Connect the plug, connect the power supply, and start the switch key. : Pour the wax beans into the inner pot as needed, close the lid, and set the required temperature or follow the default temperatureof the machine to 85 degrees Celsius or 75 degrees Celsius. It needs to be specially explained that the set temperature is not the maximum temperature during the wax melting process, but the constant temperature of the wax after the wax melting is completed. At the beginning of melting wax, the temperature will slowly rise from low to the highest temperature of 120 degrees over time, then keep at 120 degrees for 12-15 minutes to melt the wax, and then slowly drop back to the set temperature. In addition, if you need to switch between Celsius and Fahrenheit, you need to press and hold the switch button for 3 seconds before switching. Plug Type: US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Colour:black Material: ABS Size:157 x 157 x 145MM Package Contents: 1 x Candle Wax Melting Pot 1 x Ac Power Cord 1 x English manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.