Product Description A diagnostic tool with a USB interface and switch for BMW INPA K+CAN K+DCAN FTDI FT232RL chip, compatible with BMW OBD2 scanner JR2025032601225. Brand new arrival, compatible with BMW INPA K+CAN, equipped with FT232RL chip and switch, compatible with BMW models using the 8-pin K-LINE protocol. USB OBD2 interface for BMW INPA/Ediabas K+DCAN, enabling comprehensive diagnostics for BMW models from 1998 to 2013 (all functions are the same as the OMNITEC interface). INPA K+CAN for BMW features two built-in K and D-CAN buses. INPA K+CAN for BMW Functions 1. Read and clear fault codes 2. Adaptation 3. Driver programming 4. Application coding - and other functions... INPA K+CAN for BMW Supported Protocols 1: High-speed D-CAN and PT-CAN (500 kbit/s) 2: Low-speed K-CAN (100 kbit/s) 3: Standard BMW protocol (BMW OBD interface). D-CAN is applicable to 1: E60, E61 (from March 2007) 2: E83 (from September 2006) 3: E81, E87 (from March 2007) 4: E90, E91, E92, E93 (from March 2007) 5: E70 (new X5) 6: R56 (new MINI) PT-CAN, K-CAN - Fully switchable CAN bus speeds - Driver diagnostics without vehicle requirements Protocols applicable to older BMW OBD interfaces 1995 to 1998 (no K-line required). Compatible with all models from 1998 to March 2013 Package Contents: 1 K+CAN type BMW INPA data cable with switch 1 driver CD