Automatic Water Level Control Valve Tower Floating Tank Ball Valve

₩39,090
+ ₩10,399 배송

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • 브랜드: Unbranded

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • 브랜드: Unbranded
희망소매가격: ₩48,090
가격: ₩39,090
절약 금액: ₩9,000 (18%)
판매자::
₩39,090
+ ₩10,399 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Automatic Water Level Control Valve Tank Tower Floating Ball Valve Q81COOTDTYThe valve is a replacement for the traditional float, which can be used for various high water water systems, swimming pools, water towers of industry and civil construction, etc. Automatic control, low self-replenishing water, water fully automatic stopFour inlets, large water volumeBeautiful appearance, small size, practical, simple installationNo electricity, easy to use, long service life, low failure rate, saving water resourcesWorking pressure range: 1-10KG (0.1-1mpa)Application Medium: water cleaningSuitable temperature Medium: le; 70 °C High Temperature Resistance Average Temperature: 70 °C - 120 °C When the pool level or water tank drops, the valve body will fall, and then the control valve precursor will be opened. Because it affects the water pressure in the pipe, the sealing surface of the control valve will be opened. Finally, the water comes out and vice versa. Note: This production belongs to liquid level control valves. Once installed, the float must be vertical. If you want to install from the top, the elbow needed to connect the float valve and inlet pipe. Firstly, the supply line should be fixed in the horizontal plane, and then connect an automatic valve to adjust the water level at the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valves. The ball valve should be open when in use. If two valves are installed in the same pool, the two valves should be kept in the same horizontal plane. Before installation, clean the debris in the pipes in case of blockage. If the water quality is not good, the valves must be properly maintained. If users find that the time of adding water becomes longer, they can just load the water inlet and wash it Material: Nylon PA66 + Food Grade RubberSize: 72x50x70mm Quantity: 1 PcNote: Please allow 1-3mm error due to manual measurement. Pls make sure you do not mind before you make a bid, due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Content:1 x Water Level Adjusting Valve
  • 브랜드: Unbranded
  • 카테고리: 급수
  • Fruugo ID: 397918466-848419493
  • EAN: 6935169992436

배송 및 반품

5일 이내에 발송됨

  • STANDARD: ₩10,399 - 배달 사이 수 15 10월 2025–수 29 10월 2025

네덜란드에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com