Automatic water level control for tank float valve towers

₩57,890
무료 배송

Automatic water level control for tank float valve towers

판매자::

₩57,890

할인 ₩16,800 (22%)

권장소매가

₩74,690
재고 있음
무료 배송

14일 반품 정책

결제 방법:

  • 브랜드: Unbranded

제품 상세 정보

제품 상세 정보

Automatic water level control for tank float valve towers

This check valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It automatically controls water flow, replenishes at low levels, and automatically stops when full. It has four inlets for large water output, a beautiful appearance, a compact size, and is practical and convenient to install. It requires no electricity, is easy to use, has a long service life, a low failure rate, and saves water resources. Operating pressure range: 1-10KG (0-1-1MPa). Compatible media: clean water; compatible media temperature: 70℃; high-temperature resistant media temperature: 70℃-120℃. When the water level in the pool or check valve drops, the check valve body sinks and the check valve control valve core opens. When the water pressure in the pipeline changes, the sealing surface of the control valve will open and water will flow out, and vice versa. Note that this product is a level control valve. When installing, the float must be vertical. If it needs to be installed from the top, an elbow is required to connect the valve float and the inlet pipe. First, the inlet pipe should be fixed on a horizontal surface. Then, connect the automatic water level control valve to the inlet according to the standard. The inner diameter of the main inlet should be the same as the normal diameter of the control valve. When in use, the valve's shut-off valve should be fully open. If two valves are installed in the same pool, the two valves should be kept on the same horizontal surface. Before installation, please clean the impurities in the pipe to avoid blockage. If the water quality is poor, the valve needs to be properly maintained. If the user finds that the water filling time is too long, simply flush the inlet. Material: Nylon PA66 + food-grade rubber. Size: 72x50x70mm. Quantity: 1 piece. Note: Please allow an error of 1-3mm due to manual measurement. Please ensure that you do not mind before bidding. Due to differences in different monitors, the picture may not reflect the actual color of the item. Thank you. Package contents: 1 x Water level control valve
  • Fruugo ID: 544793497-1101311396
안전

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Select the appropriate model based on specifications.

배송

배달

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 목 29 10월 2026–월 09 11월 2026 - 무료

중국에서 발송.

반품

보고

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다.

전체 반품 정책 보기