Automatic Tool Setting Gauge High Accuracy 4Lines ZShaft CNC Engraving Machine Parts

₩88,890
무료 배송

Automatic Tool Setting Gauge High Accuracy 4Lines ZShaft CNC Engraving Machine Parts

  • 브랜드: Unbranded

Automatic Tool Setting Gauge High Accuracy 4Lines ZShaft CNC Engraving Machine Parts

  • 브랜드: Unbranded
희망소매가격: ₩115,490
가격: ₩88,890
절약 금액: ₩26,600 (23%)
판매자::
₩88,890
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Feature:1. With dustproof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying2. No builtin amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)3. The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output signal are measured, with high accuracy.4. Alarm signal can be sent when overtravel. The product adds a blowing function, which can automatically clean the counter knife surface.5. The shell is made of ground 4S material, durable and not easy to damageSpecification:Item Type: Automatic Tool Setting GaugeOutput Mode: B: NC (normally closed)Stroke: 5mmRepeatability: 0.001mmElectric Shock Life: 3 million timesProtection Structure: IP67Contact Force: 1.5NMaterial of the Contact Area: Hard-bondingHousing Material: Ground 4SProtection Tube: 1 meters minimum bending radius R25Cable: 2 meters oil resistant 4-coreElectrical Aspects: 1. Contact rating DC24V 10% 20mA (maximal)2. When the body of the machine is grounded, use the tool setter to install it on the side of the ground wire.3. For the tool setting instrument with LED, pay attention to the connection (+) (-) when connecting. Recommended value is 10mA, resistance load.4. For the output structure when the interface unit is attached, please read the user manual.Package List:1 x Automatic Tool Setting GaugeNote:1. Please control the tool setting speed at 50 ~ 200mm / min2. Operating ambient temperature range: 0 ~ 80 3. Please control the voltage at DC24V and the current below 20mA4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo ID: 416888314-879769164
  • EAN: 7792047510606

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Warning: Please read the product instructions carefully before use to ensure correct use.
일련번호: 7792047510606

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 화 21 10월 2025–화 28 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795