Name: Electronic Drain Valve Indicator Lamp: LED indicating on/off Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240 V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components. Clean the compressed air system before installation. Observe the flow direction when installing the valve; outlet must not be blocked. Ensure supply voltage matches the drain valve voltage rating. When using DC, the positive pole must be connected to terminal "1". The drain valve comes with a pre-attached cable: brown wire is L (live), blue wire is N (neutral), yellow-green wire is safety ground (GND). Tighten the screws on the terminal box securely to prevent water ingress. Warning: When installing the electronic drain valve, ensure: - Compressed air system is fully depressurized. - Power supply is disconnected. Color: Gold + Black Material: Metal Size: Aperture: 5 mm Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Light and display settings may cause slight color variations between the image and actual item. Measurement allows an error of ±1–3 cm.