AC 220V 1/2 inch 2-Way Electronic Timed Compressor Gas Tank Automatic Drain Valve Electronic Drain Valve with LED Indicator for On/Off Status Voltage Range: ±10% of Rated Voltage Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Medium Temperature: 90°C Ambient Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Suitable for Use in Filters, Separators, Dryers, Gas Tanks, Drip Legs, and Other Compressed Air System Components Clean the Compressed Air System Before Installation Observe Proper Flow Direction During Installation – Do Not Reverse Outlet Ensure Supply Voltage Matches Drain Valve Voltage Specification When Using DC Power, Connect Positive Pole to Terminal "1" Factory-Wired Cable: Brown Wire = Live (L), Blue Wire = Neutral (N), Yellow-Green Wire = Ground (GND) Tighten the Long Screw on the Terminal Box to Prevent Water Ingress Install Only After System is Depressurized and Power is Disconnected Color: Gold + Black Material: Metal Aperture Size: 5 mm Port Size: 1/2 inch NPT Package Includes: 1 x Electronic Drain Valve Note: Other Accessories Not Included Note: Lighting and Display Differences May Cause Slight Color Variation Between Image and Actual Item Measurement Tolerances May Vary by ±1–3 cm