AC 220V 1/2 inch 2-Way Electronic Timed Compressor Gas Tank Automatic Drain Valve AC 220V 1/2 inch Electronic Timed 2-Way Compressor Gas Tank Automatic Drain Valve Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED On/Off Indicator Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components. Clean the compressed air system before installation. Observe proper valve installation direction: outlet must not be blocked. Ensure supply voltage matches drain valve voltage requirements. When using DC power, connect positive pole to terminal "1". Drain valve comes with pre-attached cable: Brown wire – Live (L) Blue wire – Neutral (N) Yellow-green wire – Ground (GND) Tighten the terminal box screws securely to prevent water ingress. Warning: Before installing the electronic drain valve, ensure: - Compressed air has been fully released (system is depressurized). - Power supply is disconnected. Color: Gold + Black Material: Metal Aperture Size: 5 mm Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Lighting and display settings may cause slight color variations between image and actual item. Measurement error allowed: ±1–3 cm.