설명
Description:
This is a kit parts. You should solder it by yourself.
Features:
1. High sensitivity;
2. Low power;
3. Wide operating voltage range;
4. Low power consumption;
5. DIY design;
6. Colorful display;
7. Mode adjustable;
Parameter:
No. Parameter Value
1 Model: ASD-84;
2 Standby current: Less than 1mA;
3 Soldering difficulty Level: Easy;
4 Working voltage: DC5V;
5 Display LED: 8*4;
6 Display color: Red+Blue;
7 LED Size: 2*5*7;
6 PCB Size: 94*39.5mm;
Instructions:
Step 1: Complete the installation in the normal way following installation manual and schematic. (Please request separately).
Step 2: Connect audio;
Step 3: DC 4-9V voltage;
Step 4: Adjust the working mode;
Step 5: Test and use.
Mode setting:
Mode Set Method Remarks:
Factory Testing Mode Press button S1 before Power on It is used to detect all LED whether can be ON;
Fast Flashing Mode(3) Short press S1 less than 1second The refresh frequency is very fast;
Medium Flashing Mode(2) Short press S1 less than 1second The refresh frequency is general;
Slow Flashing Mode(1) Short press S1 less than 1second The refresh frequency is slow;
High Sensitivity Mode(H) Long press S1 more than 2second It can detect weaker audio signals;
Medium Sensitivity Mode(B) Long press S1 more than 2second It can detect general audio signals;
Low Sensitivity Mode(L) Long press S1 more than 2second It can filter more interference audio signals;
Using attention:
1. Please make sure all the components in the right direction and right place.
2. Please check whether pseudo/float welding. This is very important.
3. The soldering iron can't touch the components for a long time, otherwise, the components will be damaged because of the high temperature.
4. It is recommended to use a stable power supply, otherwise, it may interfere with the audio signal output.
Component list:
NO. Component Name PCB Marker Parameter Quantity:
1 Metal Film Resistor R15 10ohm 1;
2 Metal Film Resistor RX1-RX4,RY5-RY12 47ohm 12;
3 Metal Film Resistor R13-R14 470K 2;
4 Ceramic Capacitor C5 0.001uF 102 1;
5 Ceramic Capacitor C2-C4 0.1uF 104 3;
6 Electrolytic Capacitor C1 220uF 1;
7 Red LED D1-D16 2*5*7mm 16;
8 Blue LED D17-D32 2*5*7mm 16;
9 Audio Socket J2,J3 SMD3P 2;
10 Power Socket J1 DC3.5 1;
11 WD1084 U1 DIP-16 1;
12 Button S1 6*6*5 1;
13 USB to DC Cable;
100cm 1;
14 Audio Cable;
100cm 1;
15 PCB ASD-84 94*39.5mm 1;
Application:
1. Electronic teaching;
2. Exercise soldering skills;
3. Circuit application;
Frequency asked questions:
1. Why can't work?
A: Please make sure all components in the right direction and right place and check whether pseudo/float welding. This is very important.
Install tools you needpreliminary preparation by yourself:
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
-
브랜드:
Unbranded
-
카테고리:
부대용품
-
Fruugo ID:
341878065-749450451
-
EAN:
8745290879722
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Not suitable for children under 36 months
재료:
other
