Applicable For CG-125 Smart Remote Control With Strobe Flasher Multi-Mode Motorcycle Igniter Motorcycle CDI

▶Attention: Before purchasing, please carefully compare the original ignition plug of your motorcycle with the plug shown in the product picture to ensure they are consistent. Thank you.(Some motorcycles require the igniter plug pin sequence to be changed. Please ask a professional to install it. Thank you.) Due to different production batches, there may be slight errors in the color of the product, but this does not affect its use at all. We hope you can understand. Thank you. ▶Fitment: Compatible with Chinese motorcycles that use AC or DC CDI, for Italikas, for Vento, for Kurazai, for Dynamo, for Zmoto, etc. For Italika 125Z For Italika 150Z For Italika 150SZ For Italika 170Z For Italika 200z For Italika 250Z For Italika 250SZ For Italika FT125 For Italika FT125TS For Italika FT150 For Italika FT150S For Italika FT150TS For Italika FT180TS For Italika FT200 For Italika FT250 For Italika RT250 For Italika RT200 For Italika RC125 For Italika RC150 For Italika RC150GT For Italika RC200 For Italika Rc250 For Italika DM150 ROJA For Italika DM200 For Italika DM250 For Italika D T125 For Italika DT150 For Italika EX200 For Italika Vortex 250 Vort-X For Italika sptfire 250 For Italika FORZA 125 For Italika XFT125 For VENTO WORKMAN 150 For Vento ryd er 3.0 For Vento lithium 2.0 For Vento xpress 150 For Veloci razzer gtr3 200r For Vento crossmax For HONDA CGL 125 TOOL ▶Product Overview: This product is a revolutionary, high-performance intelligent motorcycle ignition (CDI). Its chip is compatible with both single- and dual-boss motorcycles and features a built-in strobe flasher module. It also comes with a power cable compatible with both DC and AC motorcycles. It comes with a smart remote control for remote switching between four driving modes. ▶Core Functions and Features: 1. Intelligent Remote Control Four-Mode Switching: Anti-Theft Mode: Locks the ignition system, preventing the engine from starting and placing the vehicle in an armed state. Original Factory Mode: Restores the motorcycle to factory default settings, balancing fuel consumption and power. Competition Mode 1: Optimizes the ignition curve at low and mid-range speeds, increasing torque and delivering sharper acceleration. Competition Mode 2: Aggressive ignition advance angle settings maximize high-speed horsepower, designed specifically for competitive riding. a. Built-in strobe bursting flash turn signal function: Directly activate the turn signal switch (yellow lead), and the turn signal flashes in a fast-paced pattern. This provides an outstanding visual effect and enhanced warning. b. DC/AC Universal: Equipped with a 12V power cable (red lead), it offers maximum compatibility. c. Smart Remote Control: Remote control, convenient operation, with a maximum range of approximately 15-20 meters. ▶Installation Steps: 1. Locate the original vehicle CDI: Find the original vehicle ignition (CDI), usually located under the seat or inside the side cover. 2. DC Motorcycles: Connect directly to the plug without connecting the red power cable. 3. AC Motorcycles: The original EXT port on the vehicle does not need to be connected. The red 12V power cable (red wire) must be connected to the positive terminal (+) of the battery. 4. Connect the strobe flasher cable (yellow wire) to the turn signal switch cable. 5. The remote control battery needs to be replaced regularly. 6. The remote control signal has a buzzer and LED for easy operation prompts. ▶Safety Warning: Before installation, be sure to turn off the ignition lock switch and disconnect the negative battery cable to prevent short circuits. If you are not familiar with motorcycle electrical circuits, we recommend that you have a professional repairman perform the installation. Wish you a happy ride and enjoy the excellent experience brought by smart technology! ▶Feature: high performance CDI High class quality and very good 6 pin [4 prong + 2 prong](AC or DC) (with instruction manual)