설명
Features:
1.8 inch TFT display screen for you to see the images more clearly, give you a better using experience.
Temperature measurement ranges is 0~80℃ that can meet your most needs.
Portable size and easy to carry, you can take it with you to anywhere you want to use it.
It can be applied to check electronic products and has a wide applications.
Built-in lithium battery, so you can recharge in time when there is no electricity, no need to worry about the sudden power failure affecting the use.
Specifications:
Material: PCB
Resolution: 8*8
Temperature measurement ranges: 0℃~80℃
Measurement accuracy: ±3.5℃(Central point, 20~50℃)
Operate temperature : 10℃~50℃
Operate humidity: ≤70%
Refresh rate: 10Hz
FOV: 60°*60°
Power port: USB 5V
Battery: 1 * lithium battery, 200mAh (included)
Item size: 60 * 46.0 * 18mm / 2.4 * 1.8 * 0.7in
Item weight: 37g / 1.3ounce
Package size: 85 * 60 * 30mm / 3.3 * 2.4 * 1.2in
Package weight: 52g / 1.8ounce
Packing list:
1 * Simple Infrared Thermal Imager
Type 3
Features:
The module can be powered directly by USB 5V to produce infrared images.
Use AMG8833 infrared thermal sensor. The resolution is 8*8, and the farthest detection distance is 7 meters.
It can be applied to check electronic products.
Portable and compact, high performance, easy to use.
Specifications:
Material: PCB
Temperature accuracy:
High performance type high gain: typical ±2.5℃ ±4.5℉
High performance type low gain: typical ±3.0℃ ±5.4℉
Human detection distance: 7m or less (reference value) 22.966 ft
NETD:
Typ. 0.05℃ 32.900℉ 1Hz
Typ. 0.16℃ 32.288℉ 10Hz
Viewing angle: typical 60°
Optical axis gap: within typical ±5.6°
Current consumption:
Typical 4.5mA (normal mode)
Typical 0.2mA (sleep mode)
Typical 0.8mA (stand-by mode)
Setup time:
Typical 50ms (time to enable communication after setup)
Typical 15s (time to stabilize output after setup)
Number of pixel: 64 (vertical 8 * horizontal 8 matrix)
External interface: 1²C (fast mode)
Frame rate: typical 10 frames/sec or 1 frame/sec
Operating mode: normal, sleep, stand-by (10 sec or 60 sec intermittence)
Output mode: temperature output
Calculate mode: no moving average or twice moving average
Temperature output resolution: 0.25℃ / 32.45℉
Number of sensor address: 2 (1²C slave address)
Thermistor output temperature range: -20℃~80℃ (-4℉~176℉)
Thermistor output resolution: 0.0625℃ / 32.1125℉
Item size: 38 * 36 * 17mm / 1.5 * 1.4 * 0.7in
Item weight: 17g / 0.6ounce
Package size: 90 * 80 * 20mm / 3.5 * 3.1 * 0.8in
Package weight: 19g / 0.7ounce
Packing List:
1 * AMG8833 Thermal Imager with Housing
-
브랜드:
Unbranded
-
카테고리:
센서
-
색상:
Type 3
-
Fruugo ID:
92441444-193737331
-
EAN:
817208113070
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
