All Button Arcade Controller Support Mode Switching SOCD Mode Turbo Mode 12 Keys Arcade Fight Stick with 5.9ft Cable Item Type: Arcade Controller Product Material: ABS Panel Size: Approx. 29x19.5x6cm / 11.4x7.7x2.4in Cable Length: Approx. 180cm/5.9ft Interface: USB2.0 Buttons: Direction Keys x 4, Operation Buttons x 8 Delay: Less Than 1ms Mode Switching: Pressing and holding the following buttons to power on while inserting the joystick will switch modes, and switching modes can be saved even when power is turned off. A, B, X, Y, RTHID KB Buttons for Mode Switching A: For Switch B - PC/X Input: For PC computer or PC 360 X - for PS3/Dinput: for PS3 or PC host mode RT for HID KB: for HID computer keyboard mode SOCD Mode: Switch the SOCD mode to realize some special operations such as post overwrite by pressing the following buttons at power on: HOME and START and DOWN: Back to Center (U+D=N, L+R=N). HOME and START and UP: Direction Up Priority (U+D=U, L+R=N). HOME and START and LEFT: Last Input Priority. Turbo Settings: A, B, X, Y, R1, L1, R2, L2 8 buttons can set the turbo mode. The turbo mode can be adjusted between 1 and 60 times per second (1 time/second to 60 times/second). If the Organic Light Emitting Diode is connected, you can see the current turbo speed and the buttons that have been turbo. To switch the turbo mode on or off: press and hold the TURBO (FN1) button and the button for which the turbo is to be set. Adjusting the speed of the turbo: press and hold TURBO and UP to increase the speed, press and hold TURBO and DOWN to decrease the speed.