Support for AI acceleration - ESP32-S3 MCU adds vector instructions for accelerating neural network calculations and signal processing. AI developers can use these vector instructions through the ESP- and ESP-NN libraries to achieve high-performance image recognition, voice wake-up and recognition applications. ESP-WHO and ESP-Skainet also support this feature. Complete security mechanism - ESP32-S3 provides a complete security mechanism and protection measures for IoT devices to prevent malicious attacks and threats. It supports flash encryption based on -XTS algorithm, secure boot based on algorithm, digital signature and HMAC. ESP32-S3 also adds a "World Controller" module, which provides two non-interfering execution environments to implement a trusted execution environment or permission separation mechanism. Wi-Fi + Bluetooth 5 (LE) - ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g) and supports 40 MHz bandwidth; its low-power Bluetooth subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh, which can achieve long-distance communication through Coded PHY and broadcast extension. It also supports 2 Mbps PHY to increase transmission speed and data throughput. ESP32-S3's Wi-Fi and Bluetooth LE radio performance are excellent and can work stably even at high temperatures. Rich IO interfaces - ESP32-S3 has 45 programmable GPIOs and common peripheral interfaces such as SPI, I2S, I2C, PWM, , ADC, UART, SD/MMC host controller and TwAITM controller. 14 of the GPIOs can be configured as capacitive touch inputs for HMI interaction. In addition, ESP32-S3 is equipped with an ultra-low power coprocessor (ULP), which supports multiple low-power modes and is widely used in low-power application scenarios. software support - ESP32-S3 uses the IoT development framework ESP-IDF. ESP-IDF has successfully enabled dreds of millions of IoT devices, has undergone rigorous testing and release cycles, and has a clear and effective support strategy. Based on its software architecture, developers easier to build applications or migrate existing programs to the ESP32-S3 platform with their familiarity with tools and . Parameter: This series of programs are backward compatible, for example, the N4 program can run on N& N16 without modification. Wi-Fi: Support IEEE 802.11 b/g protocols Support 20 MHz and 40 MHz bandwidth in 2.4 GHz band, Support 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM) Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU) Immediate Block Fragmentation and defragmentation Beacon automatic detection (hardware TSF) 4 x virtual Wi-Fi interface Support infrastructure network (Infrastructure ) Station mode, SoftAP mode and Station + SoftAP mixed mode at the same time. Please note that when ESP32-S3 scans in Station mode, the SoftAP channel change simultaneously Antenna diversity 802.11 Bluetooth: Bluetooth LE: Bluetooth 5, Bluetoothmesh High power mode (20 dBm) Rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps Advertising Extensions Multiple Advertisement Sets Channel Selection Algorithm #2 Wi-Fi and Bluetooth coexist, sharing the same antenna Colour:Black Material:Plastic Package Contents: 1 * AI XiaoZhi Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.